Tank Heat Tracing System and Insulation Maintains Temperature Sensitive Liquid Levels
Assmann
plastic storage tanks are available with a heating system to maintain the
level required by temperature sensitive stored liquids. Adhesive
backed thin carbon strip heat tracing elements embedded in
clear polyester film are wrapped around the tank and covered
with a two-inch thick layer of polyurethane foam insulation
covered with two coats of mastic.
A control panel regulates
temperature measured by high level and maintenance level thermostats
set to desired limits. Using different heat tracing elements,
temperature can be maintained at any point above 50°F, 80°F
or 100°F over the lowest ambient temperature to which the
tank is subjected. Heat tracing and insulation are available
for vertical tanks from 300 to 12,000 gallons capacity, conical
bottom tanks from 1,575 to 4,200 gallons and horizontal cylindrical
tanks from 500 to 2,500 gallons.
When requesting information,
specify the gallon capacity and the Delta T (DT) for your
material. (The temperature differential is calculated by subtracting
the minimum ambient temperature to which the tank is subject
from the temperature at which your material must be maintained.)
Control
Box (115V dual thermostats, 1 high level, 1 maintenance level.)
Get
the PDF file for Tank Heat Tracing and Insulation for Polyethylene Storage Tanks
Assmann Also Offers a Variety of Other Accessories to Compliment Their Plastic / Polyethylene Above-Ground Tanks |
