Double Wall Storage Tanks and Secondary Containment Systems Provide Protection Against Hazardous Chemical Spills
Double wall tanks (IMT) provide the best protection against hazardous chemical spills into the environment. Inner tank dome overlaps outer tank sidewall to prevent rainwater, snow and debris from entering into the containment basin. Our ability to heat trace and insulate make these tanks perfect for temperature sensitive chemicals. Molded-in lifting lugs (large tanks only) and upper fitting flats are standard. Molded-in lower fitting flats, along with a sturdy Assmann designed bottom outlet, reduce the cost of expensive double wall outlets.
All double wall tanks are designed with wall thicknesses equal to or greater than that required by ASTM D-1998 standards. Double wall tanks can be customized by adding Seismic zone 4 or 120 MPH wind load tie down assemblies, leak detection, ultrasonic level indicators, and tank ladder assemblies.
Plastic / Polyethylene Double Wall Tank Accessories for Secondary Containment Systems
- Seismic zone 4 restraint
- 120 MPH wind load restraint
- Ultrasonic level indicator
- Leak detection system
- High and low level alarms
- Heat tracing and insulation
- Fiber Reinforced Ladders
- Top discharge assemblies with foot valve
- Click here to see more detailed information on Double Wall Tank Accessories
- Click here for more information on Small Double Wall Tanks.
Available in 20 to 405 gallon capacities.
- Click here for more information on Large Double Wall Tanks.
Available in 150 to 6550 gallon capacities.
Model number availability and individual specifications subject to change without notice. Gallonage and weights are approximate. All wall thicknesses conform to ASTM D-1998.
Assmann Corporation of America
300 North Taylor Road, Garrett, IN 46738 USA
Phone: 888-357-3181 • Fax: 888-Tank Fax (826-5329)
Phone: 260-357-3181 • Fax: 260-357-3738