The
Assmann Polyethylene / Plastic Tanks Warranty
Assmann Corporation
of America warrants that all tanks manufactured and sold shall be
free of defects in material and workmanship for a period of five
(5) years limited. All tanks carry two (2) years full warranty with
the remainder prorated from date of shipment, with the following
exceptions:
- Stress
cracking agents, i.e. concentrated sulfuric acid or sodium hypochlorite,
special warranty may apply (consult factory).
- All tanks
must be used in accordance with Assmann chemical resistance
charts.
- All tanks
must be supported or mounted in a manner approved by Assmann
and in accordance with approved installation and use instructions.
- Transport
and storage tanks must be used in accordance with temperature
limitation of polyethylene (HDLPE, linear = 120° F. XLPE, crosslinked
= 150° F.)
- Warranty
does not cover misuse, fire, accident, negligence or tanks which
have been altered after the said date of shipment, except alterations
or repairs made only by Assmann.
- Liability
of the manufacturer under this warranty is limited to the repair
and/or replacement of the tank only, (at manufacturer's option)
which has been proven to have been defective at date of shipment.
Assmann will bear no liability for consequential or incidental
damages, losses or expenses of any kind relative to tank failure.
- Should
purchaser or user not pay for any tanks in full when as due,
Assmann's warranty shall be deemed suspended until such time
as Assmann receives payment in full. The suspended period will
not be added on to the warranty period applicable to said order.
- Intermediate
Bulk Containers (IBC) manufactured by Assmann are so warranted
for one (1) year from date of shipment.
- Hardware
and accessories are warranted for one (1) year from date of
shipment.
- Consult
factory for complete warranty
|
