Anti-Foam Elbow Assembly and Fill Line/Drop Tube Assembly for Plastic Storage Taks from Assmann
Fill Line/Drop Tube Assemblies for Polyethylene Storage Tanks
These assemblies make it possible to fill the plastic storage tank from a convenient position outside the tank. They do not include through-wall fittings. The fill line consists of an exterior drop tube, 90 degree elbow, ball valve, male quick disconnect coupling, dust cap and exterior pipe support bracket. The interior assembly consists of drop tube and pipe support bracket. Gasket and bolts must be ordered separately. Optional union may be ordered with exterior fill line. When ordering exterior fill line and interior drop tube together, order one gasket and one set of two bolts.
| Fill Line/Drop Tube Assemblies Available Sizes (inches) | |||
|---|---|---|---|
| Size | 1 | 2 | 3 |
Anti-Foam
Elbow for Plastic Bulk Storage Tanks
This assembly with 45 degree elbow and nipple extends to within 3 inches of the plastic storage tank wall, directs liquid to run smoothly down the interior surface of the tank. This will reduce the generation of foam on the surface of the contents. Through-wall fittings and/or self-aligning dome fittings (shown in illustration) are not included and must be ordered separately.
| Anti-Foam Elbow Available Sizes (inches) | ||||
|---|---|---|---|---|
| Size | 1 | 2 | 3 | 4 |
- Download the pdf for Fill Line/Drop Tube Assemblies and Anti-Foam Elbow Assemblies for Plastic Storage Tanks
- Assmann Also Offers a Variety of Other Accessories to Compliment Their Plastic / Polyethylene Above-Ground Tanks
Assmann Corporation of America
300 North Taylor Road, Garrett, IN 46738 USA
Phone: 888-357-3181 • Fax: 888-Tank Fax (826-5329)
Phone: 260-357-3181 • Fax: 260-357-3738
E-mail: info@assmann-usa.com